Filter
Top Products
05 Locks and alarm
97
Remote control with key blade
05
Weak remote control battery
When the battery runs down and full func-
tionality cannot be guaranteed, the informa-
tion symbol and
REMOTE BATTERY LOW
VOLTAGE
appear on the display.
Replacing the remote control battery
If the locks repeatedly fail to respond to sig-
nals from the remote control at a normal dis-
tance, the battery should be replaced (type
CR 2032, 3 V).
– Pull out the key blade.
– Place the remote control with the keypad
downward and remove the screw (1) using
a small screwdriver.
– Remove the cover.
– Carefully note the position of the battery’s
(+) and (–) poles on the inside of the
cover.
– Prise out (2) and change the battery. Avoid
touching the battery and its terminals with
your fingers.
– Refit the cover and screw it shut.
– Press the key blade back into place.
Dispose of the old battery in an environmen-
tally-friendly way.