Filter
Top Products
05 Locks and alarm
99
Keyless drive (option)
05
• the ignition dial has been turned to
position 0
•the READ button has been pressed.
Never leave any remote control in the
car
If a remote control with keyless drive function
is left in the car, it is made passive when the
car is locked. This prevents unauthorised en-
try.
If someone breaks into the car and finds the
remote control, it can be activated and used
again. It is therefore important to handle all
remote controls with care.
Interference to remote control function
Electromagnetic screening and fields can in-
terfere with the keyless drive system. To
avoid this: do not place the remote control
near mobile phones, metallic objects or, for
example, in a metal briefcase.
If interference is experienced nonetheless,
use the remote control and key blade in the
normal way. See page 94.
Unlocking
When the remote control is within the range
covered by the system’s antennas:
– Open the doors by pulling the relevant
handle.
– Open the boot lid by pressing under the
boot lid opening button and lift the boot
lid.
If for some reason the keyless drive function
in the remote control is not operating, the car
can be unlocked using the remote control
functions, see page 94.
Unlocking using the key blade
The driver’s door can be opened as follows
(central locking system not activated):
– Carefully prise out the plastic cover in the
handle by inserting the key blade in the
hole on the bottom of the cover.
– Unlock the door using the key blade.
Power seat (option) – remote control
with memory function
If several people with keyless drive remote
controls get into the car, then the driver’s
seat will be adjusted for the person who
opens the door first.