Filter
Top Products
04 Interior
83
Front seats
04
Power seat (option)
The seats can be adjusted for a certain time
after unlocking the door with the remote con-
trol without the key being inserted into the ig-
nition switch. The seat can always be set in
ignition position I or II.
1. Front edge of seat cushion up/down
2. Seat, forwards/backwards
3. Seat, up/down
4. Backrest rake
Overload protection is deployed if any seat is
blocked. If this occurs, switch off the ignition
and wait a short time before operating the
seat again. Only one of the seat’s settings
can be adjusted at a time.
Memory function
Buttons for memory function
Store setting
– Adjust seat.
– Press and hold button M while pressing
button 1, 2 or 3 simultaneously.
Using a stored setting
Press one of the memory buttons 1 – 3 until
the seat stops. If you release the button then
the movement of the seat will stop.
Emergency stop
If the seat accidentally begins to move, press
any of the buttons to stop the function.
Key memory in remote control key
The driver’s seat settings are stored in the
key memory when the car has been locked
with the remote control key. When the car is
unlocked with the same remote control key
the driver’s seat adopts the stored settings
when the driver’s door is opened.
WARNING
Risk of crushing. Make sure that children do
not play with the controls.
Check that there are no objects in front of,
behind or under the seat during adjustment.
Ensure that none of the rear seat passen-
gers can be trapped.
NOTE
The key memory is independent of the seat
memory.