Filter
Top Products
10 Infotainment system
208
Radio functions
10
Storing autostored presets in another
memory
An autostored preset can be transferred to
the FM or AM memory.
– Briefly press AUTO (7).
Auto appears in the display.
– Press a preset button.
– Press the button under which the station
will be stored and hold it depressed until
the message
Station stored appears in
the display.
The radio exits Auto mode and the stored
station can be selected as a preset.
Scanning
SCAN (4) automatically searches for strong
AM or FM stations. When a station is found, it
is played for approx. eight seconds before
scanning is resumed.
Activating/deactivating Scan
– Select wavelength using AM/FM.
–Press SCAN to activate.
SCAN appears in the display. Cancel with
SCAN or EXIT.
Storing a station
A desired station can be stored as a preset
while Scan is active.
– Press a preset button and hold it de-
pressed until the message
Station stored
appears in the display.
Scan is interrupted and the stored station
can be selected as a preset.
RDS functions
Radio Data System – RDS links FM transmit-
ters into a network. An FM transmitter in such
a network sends information that gives an
RDS radio the following functions:
• Automatically switches to a stronger
transmitter if reception in the area is poor.
• Searches for programme form, such as
traffic information or news.
• Receives text information on current radio
programme.
Some radio stations do not use RDS or only
some if its functionality.
Programme functions
In FM mode, the radio can search for stations
with certain programme types. If a desired
programme type is found, the radio can
switch stations, interrupting the audio source
currently in use. For example, if the CD player
is in use, it is paused. The interrupting trans-
mission is played at a preset volume; see
page 210. The radio returns to the previous
audio source and volume when the set pro-
gramme type is no longer broadcast.
The programme functions alarm (
ALARM),
traffic information (
TP), news (NEWS), and
programme types (
PTY) interrupt one anoth-
er in order of priority, where alarm has the
highest priority and programme types has
the lowest. For further programme interrup-
tion settings, see EON and REG on
page 210. The programme functions are
modified via the menu system, see page 204.
Returning to the interrupted audio
source
Press EXIT to return to the interrupted audio
source.
Alarm
This function is used to warn of serious acci-
dents and catastrophes. The alarm cannot
be temporarily interrupted or deactivated.
The message
ALARM! appears on the dis-
play when an alarm message is transmitted.
Traffic information – TP
This function allows traffic informa-
tion sent within a set station’s RDS
network to break through.
TP indi-
cates that the function is activated.
If the set station can send traffic information
then appears on the display.