Filter
Top Products
04 Interior
88
Rear seat
04
Head restraint, rear
All head restraints can be adjusted vertically
to suit the height of the passenger. The upper
edge of the head restraint should be aligned
with middle of the back of the head. Raise
the head restraint as necessary. To lower the
head restraint, press the button by the right-
hand pillar at the same time as pushing down
the head restraint. To remove the head re-
straint, press the button by the right-hand pil-
lar while lifting out the head restraint.
Tipping the rear seat backrest
The rear seat backrests can be tipped for-
wards together, or individually, to make it
easier to transport long objects. To avoid
damaging the seatbelts when folding the
backrests up or down, these should be
hooked onto the grab handles.
– Hang the seatbelts on the hooks before
lowering or raising the backrests.
– Lift the rear edge of the seat cushion (1) to
fold the seat cushions forward.
IMPORTANT
The head restraints can be damaged if they
are not removed for loading. The head re-
straint in the centre must also be removed
for heavy loads.
NOTE
When tipping the rear seat the safety plug
for the 12 V socket should be removed and
placed in the glovebox to avoid pressure
marks in the upholstery.