Filter
Top Products
09 Maintenance and service
193
Replacing bulbs
09
Cargo area
– Insert a screwdriver and gently turn so that
the lamp housing comes loose.
– Remove the blown bulb.
– Fit a new bulb.
Vanity mirror lighting
Removing the mirror glass:
– Insert a screwdriver underneath the lower
edge, in the centre. Carefully prise up the
lug on the edge.
– Insert the screwdriver under the edge on
both the left and right side (at the black
rubber points) and carefully prise so that
the lens releases at the lower edge.
– Carefully detach and lift aside the entire
mirror glass and cover.
– Remove the blown bulb and replace it with
a new one.
Fitting the mirror glass:
– First, press the three lugs at top edge of
mirror glass back into position.
– Then press the three lower lugs back into
position.