Filter
Top Products
PROGRAMMING
TMS7 SERIES ME00070B 17
Programming
7.1 Programming Procedure
Step 1. Enter program mode.
1. Simultaneously press and release the <FUNCTION> and
<STORE> keys. (When in program mode the three LEDs
to the right of the numeric display will be illuminated.)
Step 2. Select the function number to be viewed
or adjusted.
1. Press and hold the <FUNCTION> key.
2. Using the <UP> and <DOWN> keys select the required
function number. (Function numbers are left justified
and blink).
3. When the required function number is dispalyed,
release the <FUNCTION> key. The display changes to
show the function set point currently stored in memory.
(Function values are right justified and do not blink)
Step 3. Alter the function set point.
1. Review the current function set point and, if necessary,
use the <UP> or <DOWN> keys to adjust the setting.
(Pressing the <FUNCTION> key will restore the original
setting).
Step 4. Store the new function set point.
1. Press the <STORE> key to store the displayed setting
into memory.
2. Verify the new set point has been correctly stored by
pressing and then releasing the <FUNCTION> key. The
LED display should now show the new set point.
Step 5. Exit program mode.
1. Once all function settings have been made, exit the
programming mode by simultaneously pressing and
releasing the <FUNCTION> and <STORE> keys.