Filter
Top Products
GE863-GPS Software User Guide
1vv0300724 Rev. 2 - 24/01/07
command:
AT+CMGR=4
response:
+CMGR: "STO UNSENT","+393351234565"
Telit Test Message for Text Mode SMS.
OK
In this case the SMS was successfully read, the text contained was:
" Telit Test Message for Text Mode SMS."
The message was written to the storage by user (STO) but still not sent (UNSENT) to the destination
address that's the number +393351234565
2- Let's assume you want now to read the SMS that is stored at the position index 5:
command:
AT+CMGR=5
response:
+CMGR: "REC UNREAD","+393381234567890", ,"29/06/01,12:30:04+01"
Telit Test Message for Text Mode SMS RECEIVING.
OK
In this case the SMS was successfully read, the text contained was:
" Telit Test Message for Text Mode SMS RECEIVING."
The message was received (REC) from the number +393381234567890 at 12:30:04 the day 29/06/01
in the European time zone +1.
After this read command the message at index 5 becomes REC READ.
3.5.8 Listing a group of SMSs
The SMS can be grouped into 5 different groups depending on their status:
REC UNREAD - received messages still not read
REC READ - received messages already read
STO UNSENT - written messages not yet sent
STO SENT - written messages already sent
ALL - all types of messages
It is possible to have the list of all the messages in one group:
• send command AT+CMGL=<stat><cr>
where:
<stat> - status group of the message
"REC UNREAD" - new message
"REC READ" - read message
"STO UNSENT" - stored message not yet sent
"STO SENT" - stored message already sent
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 72 of 109