Filter
Top Products
GE863-GPS Software User Guide
1vv0300724 Rev. 2 - 24/01/07
To answer the call:
• Send command
ATA<cr>
• wait for response:
Response Reason Action
CONNECT 9600 The incoming call was a DATA
one and called modem is now
on line.
exchange data..
ERROR No incoming call is found, call
may have been lost
call lost
NO CARRIER The incoming call was a DATA
one and the modem
handshaking has not been
successful
check for mobile registration
and signal strength and modem
settings.
OK The incoming call was a VOICE
call and is now active.
proceed ahead
TIP: The call is answered with the appropriate type (VOICE or DATA) regardless of the
+FCLASS setting active. To distinguish between Data and Voice see the command response or
the extended format incoming call indication.
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 29 of 109