Filter
Top Products
GE863-GPS Software User Guide
1vv0300724 Rev. 2 - 24/01/07
and retry.
+CME ERROR: 16 the inserted PIN2 is wrong Check PIN2 code and retry.
NOTE: When receiving the ERROR or +CME ERROR message, repeat
Query SIM presence and
status since after 3 failed attempts SIM PIN2 is not anymore requested, but SIM PUK2 is
requested instead, hence you may need to go through procedure
2.5.2.4 (but insert PUK2
instead of PUK1)
3.1.2 Phonebook entry search by Name
As first thing, you must select the "SM" storage as active (see par.
3.1.1.1).
• send command AT+CPBF=<Name><cr>
where:
<Name> is the desired string to be found in the name field of the PB record.
•
wait for response in the format:
+CPBF= <index>,"<number>",<type>,"<name>"
OK
where:
<index> is the record number on the PB;
<Number> is the phone number;
<type> is the type of number:
145 – international numbering scheme
129 – national numbering scheme
<Name> is the alphanumeric name associated with the number.
or in the case no corresponding entries are found:
+CME ERROR: 22 or simply ERROR.
NOTE: The search for <name> string is not case sensitive and the string may or may not be
included in double brackets.
For example:
1- Let's assume you want to select the "SM" normal phonebook for operations,
command:
AT+CPBS="SM"<cr>
response
OK
- Now you might want to look for the entries with the name starting with: "FA"
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 33 of 109