Filter
Top Products
GE863-GPS Software User Guide
1vv0300724 Rev. 2 - 24/01/07
VPF validity period format
0 0 - Validity period NOT present
1 0 - VP integer represented (relative)
1 1 - VP semi octet represented (absolute)
0 1 - reserved
SRR status report request
0 - status report not requested
1 - status report requested
UDHI user data Header Information
0 - No Header on PDU
1 - Header present on PDU
RP reply path
0 - RP not set
1 - RP set
- Validity Period numerical if in relative format or string if in absolute format
This parameter represents the validity period for the SMS after which the message should be
disregarded instead of being delivered.
If in relative format (see VPF parameter) it is an integer:
0 to 143 – corresponding to (VP + 1) x 5 minutes
144 to 167 – corresponding to 12 hours + ((VP -143) x 30 minutes)
168 to 196 – corresponding to (VP - 166) x 1 day
197 to 255 – corresponding to (VP - 192) x 1 week
If in absolute format it is a string in the format:
"gg/MM/YY,hh:mm:ss±tz"
where
gg day of expiration (2 characters)
MM month of expiration (2 characters)
YY year of expiration (2 characters)
hh hour of expiration (2 characters)
mm minute of expiration (2 characters)
ss second of expiration (2 characters)
± sign of the time zone ( + or - )
tz time zone (2 characters)
- Protocol Identifier in numerical format:
This parameter identifies the protocol used by the receiver entity and informs the SC that the
conversion from SMS to that protocol should be done while delivering the message.
Protocol ID Conversion towards..
0 Implicit (default)
33 telex (or teletex reduced to telex
format)
34 group 3 telefax
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 60 of 109