Filter
Top Products
25
Step 2 Applying the recording positioning information to images
To match more than 60 images
Before step 5, repeat steps 3 and 4.
To stop matching
Press MENU during matching. On the [STOP] screen displayed, select [OK], and press
ENTER. The GPS unit returns to the menu screen.
• The GPS unit may display [cancelling] and continue matching even if you press MENU. If this
happens, wait for a while until the GPS unit stops matching.
• If you want to continue matching, select [Cancel] on the [STOP] screen and press ENTER.
To delete the positioning information from matched images (Undo)
1 Insert the “Memory Stick Duo” media/SD memory card with the previously
matched images into the GPS unit.
2 Press MENU.
3 Select [Tools] t [Undo] t [Start].
• To cancel the operation, select [Cancel].
4 Press ENTER.
• Using the Undo function, you can delete the positioning information only once from the images
that were matched most recently.
• If you process the matched images on a computer or camera, you may not be able to delete the
positioning information from the images using the Undo function.
• If you set [Matching Setting] to [Quick Matching], you can match faster than when using
[Matching]. However, you cannot use the Undo function with the images.
• [Matching] is selected as the default setting. To change the matching method, press MENU, select
[Tools] t [Matching Setting] t [Matching] or [Quick Matching].
Notes
Tips