Filter
Top Products
24
The more images there are, the more time it takes for matching. It is recommended that you match
images and data frequently.
3
Press MENU, select [Matching], and press ENTER.
The GPS unit starts scanning the images that can be matched with positioning
information. When there are many images, it will take longer time for scanning.
• To stop scanning, press ENTER.
4
Select [Start] and press ENTER.
The GPS unit starts the matching operation. When completed, [Complete]
appears.
* You can match a maximum of 60 images in one session. When there are more than 60 images
that can be matched on the GPS unit, 60 is displayed.
Be sure that you do not perform the following during a matching operation. The image data
may be damaged. If you want to do one of the following operations, stop the current matching
operation.
• open the battery cover
• turn off the GPS unit
• disconnect the USB cable
5
Remove the “Memory Stick Duo” media/SD memory card.
Tip
Battery power remaining
Total number of images
that can be matched.
Number of matched images
Number of images to be matched*
Number of images being matched
Note