Filter
Top Products
20
St
ep
2A
pp
lyi
n
g
th
e recor
di
n
g
pos
iti
on
i
n
g
i
n
f
orma
ti
on
t
o
i
ma
g
es
Installing the supplied software
By installing the supplied software on your computer, you can import images to your
computer, apply positioning information to images, and display them on a map.
This section describes the operation with the English version of screen contents.
x
Recommended computer environment
The following environment is recommended for using the supplied software.
GPS Image Tracker and PMB
OS (pre-installed): Microsoft Windows XP* SP3/Windows Vista SP1
* 64-bit editions is not supported.
CPU/Memory: Intel Pentium III 500 MHz or faster/256 MB or more (Intel Pentium III
800 MHz or faster/512 MB or more is recommended)
Hard Disk: Disk space required for installation – approximately 500 MB
Display: 1024 × 768 dots or more
• To operate movies, you need a computer system environment that supports PMB supplied with
Sony digital still cameras or Sony digital video camera recorders.
Notes on connecting the GPS unit to a computer
• Operations are not guaranteed for all the recommended computer environments
mentioned above.
• If you connect two or more USB devices to a single computer at the same time, some
devices, including your camera, may not operate, depending on the types of USB
devices you are using.
• Operations are not guaranteed when using a USB hub.
• When your computer resumes from suspended or sleep mode, communication
between the GPS unit and your computer may not recover at the same time.
• Log on to a computer as Administrator.
Notes on PMB
Check the following before installing the supplied software.
• When handling the movies recorded with Sony digital still cameras or some of Sony
digital video camera recorders, you need to install PMB supplied with the respective
model additionally.
• Be aware of the following when installing PMB supplied with Sony digital still
cameras or Sony digital video camera recorders (hereinafter collectively called
“cameras”).
– When the version of PMB supplied with the cameras is older than that of supplied
with this kit, first install PMB supplied with the cameras, and then install PMB
using the CD-ROM supplied with this kit.
– When the version of PMB supplied with the cameras is equivalent to that of
supplied with this kit or later, first install PMB using the CD-ROM supplied with
this kit, and then install PMB supplied with the cameras. By doing this, extra
functions will be added.