Filter
Top Products
Programming Transmitters to
the Vehicle
Only RKE transmitters programmed
to the vehicle will work. If a
transmitter is lost or stolen, a
replacement can be purchased and
programmed through your dealer/
retailer. When the replacement
transmitter is programmed to the
vehicle, all remaining transmitters
must also be programmed. Any lost
or stolen transmitters no longer work
once the new transmitter is
programmed. Each vehicle can have
up to eight transmitters programmed
to it. See “HOLD STEM TO
RELEARN REMOTE KEY” under
DIC Operation and Displays on
page 3-36.
Battery Replacement
Replace the battery if the REPLACE
REMOTE KEY FOB BATTERY
message displays on the Driver
Information Center (DIC). See
“REPLACE REMOTE KEY FOB
BATTERY” under DIC Warnings
and Messages on page 3-42.
Notice: When replacing the
battery, do not touch any of the
circuitry on the transmitter. Static
from your body could damage
the transmitter.
To replace the battery:
1. Separate the transmitter with a
flat thin object inserted into the
notch on the side.
2. Remove the old battery. Do not
use a metal object.
3. Insert the new battery, positive
side facing down. Replace with
a CR2032 or equivalent battery.
4. Reassemble the transmitter.
Features and Controls 2-5