Filter
Top Products
Press the customization button until
PRESS
V TO SET REMOTE
DOOR LOCK appears on the DIC
display. Press the set/reset
button once to access the settings
for this feature. Then press the
customization button to scroll
through the following settings:
VERIFICATION OFF: There will be
no feedback when you press the
lock button on the RKE transmitter.
VERIFICATION LIGHTS ONLY:
The exterior lamps will flash
when you press the lock button on
the RKE transmitter.
VERIFICATION HORN ONLY: The
horn will sound on the second
press of the lock button on the RKE
transmitter.
VERIFICATION HORN & LIGHTS
(default): The exterior lamps
will flash when you press the lock
button on the RKE transmitter,
and the horn will sound when the
lock button is pressed again
within five seconds of the previous
command.
VERIFICATION NO CHANGE: No
change will be made to this
feature. The current setting will
remain.
To select a setting, press the
set/reset button while the desired
setting is displayed on the DIC.
REMOTE DOOR UNLOCK
This feature allows you to select the
type of feedback you will receive
when unlocking the vehicle with the
Remote Keyless Entry (RKE)
transmitter. You will not receive
feedback when unlocking the vehicle
with the RKE transmitter if the
doors are open. See Remote
Keyless Entry (RKE) System
Operation on page 2-4 for more
information.
Press the customization button until
PRESS
V TO SET REMOTE
DOOR UNLOCK appears on the
DIC display. Press the set/reset
button once to access the settings
for this feature. Then press the
customization button to scroll
through the following settings:
VERIF LIGHTS OFF: The exterior
lamps will not flash when you
press the unlock button on the RKE
transmitter.
VERIF LIGHTS ON (default): The
exterior lamps will flash when
you press the unlock button on the
RKE transmitter.
3-52 Instrument Panel