Filter
Top Products
76
Setup Instructions
Press the > control until you see the Sidelooker Page. If you press
SETUP
while the Sidelooker Page is visible, the unit will present the menu item
shown in Fig. 4-15.
Sidelooker Range Menu Item
Once the Sidelooker feature is turned on, the FishFinder uses two range
settings: one for the standard displays, and a second for just the Side-
looker feature. The menu item shown here sets the range for
just
the
Sidelooker. (This will not change the range setting for the other display pages.)
The range for the Sidelooker uses the Manual setting only. Use the < and
> controls to select the range you want to use.
Possible Sidelooker Range Settings:
In feet: 5, 10,
15, 20, 30, 40, 50, 60, 80, 100, 150
In meters:
2, 4, 6, 8, 10, 15, 20, 25, 30, 40, 50
If you are done with your setup changes, press the
CLEAR
button to go
back to the normal display.
To select the next menu item, press the
arrow of the Page Control Pad.
Fig. 4-15
Sidelooker
Range
Menu Item