Filter
Top Products
75
Setup Instructions
Resetting from the Digital Page
Two functions can be reset from the Digital Page. These are Elapsed
Time and Log Reset. When the unit is displaying the Digital Page, press
the
SETUP
button. The unit will present a menu item showing the current
reading for the log. To reset the log to zero, press the > control on the
Page Control Pad.
Press the control to go to a menu item which shows the elapsed time.
To reset this item to zero, press the > control on the Page Control Pad.
(Notice that this is the only way to reset the elapsed time without turning
the unit off. Normally, both of these items will be reset to zero whenever
you turn the unit off.)
Setup Instructions for Sidelooker
Some installations include the optional Sidelooker transducer. We de-
scribed the operation of this transducer in Section 3. If your boat has this
transducer, there are some extra setup steps required.
The Sidelooker feature must be turned on using the System Setup Menu.
Figures 4-8 and 4-9 show how to reach this Menu. Press the
SETUP
button
twice to reach the System Setup Menu. Press the arrow of the Page
Control Pad to reach the line labeled “Sidelook.” Press the > arrow of the
control to turn the feature on. Next, press
CLEAR
to save the change and
go back to the main display.
Once you have turned on the Sidelooker feature, the order of the screens
changes a bit. You will recall that you can step from one page to the next
by using the < or > controls on the Page Control Pad. With the Sidelooker
feature turned on, the displays follow in this order:
• Normal or FishFinder Display Page (may include Zoom, A-Scope or
Bottom Lock Mode)
>
• Window Display Page
>
• Sidelooker Display Page
>
• Digital Display Page