Filter
Top Products
86
MAINTENANCE AND LUBRICATION
Tires
WARNING
Operating y our vehicle with worn tires will increase the possibility
of s kidding, loss of control and an accident, which could r esult in
serious injury or deat h. Always replace tires when the t read
depth m easures 1/8″ (3 mm) or less.
Improper tire inflation or the use of non-standard size or type of
tires may adversely affect vehicle handling, whic h could result i n
vehicle dam age or personal injury. Always m aintain proper tire
pressure. When replacing t ires, always use original equipment
size and type.
Tire Tread Depth
Always replace tires when tread depth
is worn to 1/8″ (3 mm) or less.
Axle and Wheel Nut Torque Specifications
Inspect the following items o ccasionally for tightness, and if they’ve
been loosened for maintenance service.
Location Specification
Front Wheel Nuts 35 ft. lbs. (47 Nm)
Rear Wheel Nuts 35 ft. lbs. (47 Nm)
Front S pindle Nut 70 ft. lbs. (95 Nm)
Center and Rear Hub
Retaining Nuts
110 ft. lbs . (150 Nm )
1/8I (3 mm)