Filter
Top Products
1
2
66
MAINTENANCE AND LUBRICATION
Gearcases
Front Gearcase
Always check and c hange the fro nt gearcase oil at the intervals
outlined in the Periodic Maintenance Chart beginning on page 53.
Maintain the oil level even with the bottom thread of the fill plug hole.
The front gearcase fill plug (1) is located on the right side of the front
gearcase.
Refer to the Gearcase Specifications Chart o n page 6 3 for
recommended lubricants, capacities and torque specifications. See
page 99 for the part numbers of Polaris products.
Oil Check
1. Position the vehicle on a level
surface.
2. Remove the fill plug. Check the
oil l evel.
3. Add the recommended oil as
needed.
4. Reinstall the fill plug. Torque to
specification.
Oil Change
1. Support the vehicle securely with a j ackstand.
2. Remove the front tire on the driver ’s side.
3. Remove the fill plug.
4. Place a drain pan under the drain plug (2) on the bottom right-hand
side.
5. Remove the drain plug. Drain the oil. Discard used oil properly.
6. Clean the drain plug. Reinstall the drain plug. Torque to
specification.
7. Add the recommended oil.
8. Reinstall the fill plug. Torque to specification.
9. Check for leaks.