Filter
Top Products
83
MAINTENANCE AND LUBRICATION
Brakes
Brake Inspection
5. Check the brake system for fluid
leaks.
6. Check the brake pedal for excessive
travel or a s pongy feel.
7. Check the friction p ads for wear ,
damage and looseness.
8. Inspect the brake disc spline and
pad wear surface for excessive wear.
9. Change pads when worn to 3/64″
(1 mm).
Park Brake Inspection
1. Slowly push the park brake pedal
down with your foot.
2. After 8 to 12 clicks of pedal
travel, check the v ehicle fo r
movement. The vehicle should
not roll while parked. If the
vehicle moves, adjustment is
necessary.
Park Brake Adjustment
1. Position the vehicle on a level surface.
2. Shift the transmission to neutral.
3. Loosen or tighten the nuts on the
pedal end of the park brake cable as
needed.
3/64″ (1 mm)
1