Filter
Top Products
1
74
MAINTENANCE AND LUBRICATION
Cooling System
Radiator Coolant Level
Always check and change the coolant at the intervals outlined in the
Periodic Maintenance Chart beginning on page 53.
WARNING
Escaping steam can cause severe bur ns. Never r emove the
pressure cap while the engine is war m or hot. Always allow t he
engine to cool before r emoving the pressure cap.
1. Lift the hood and slowly
remove the radiator cap (1).
2. View the coolant level
through the opening.
3. Use a funnel and slowly add
coolant as needed.
NOTE: This procedure is
required only if the
cooling system has
been drained for
maintenance and/or
repair . But if the
overflow bottle has
run dry, the level in
the r adiator should
also be inspected.
NOTE: Use of a non-standard pressure c ap will not allow the
recovery system to function properly. See your dealer for
the c orrect r eplacement par t.