Pioneer AVIC-X920BT GPS Receiver User Manual


 
Using the touch panel keys
5
1
34
2
1 Performs manual tuning
Totune manually, touch [o]or[p] briefly.
The frequencies move up or down one step at
a time.
Performs seek tuning
Toperform seek tuning, touch and hold [o]
or [p] for about one second and release.
The tuner will scan frequencies until a broad-
cast strong enough for good reception is
found.
p You can cancel seek tuning by touching
either [o]or[p] briefly.
p If you touch and hold [o]or[p],
you can skip broadcasting frequencies.
Seek tuning will start as soon as you re-
lease the keys.
p You can also perform these operations
by using the TRK button.
2 Selects a preset channel
The keys can be used to switch preset chan-
nels.
Scroll by dragging the keys up or down to dis-
play the preset channel you want to select,
and tap the channel.
p The lower key and the upper key appear
only when the preset channel is se-
lected.
3 Recalls equalizer curves
= For details, refer to Using the equalizer
on page 172.
4 Displays the Functionmenu
= For details, refer to Using the
Functionmenu on the next page.
5 Switches between the AVoperation
screen and the preset list display
You can switch the screen display according
to your preference.
= For details of the operation, refer to
Switching between the AV operation
screen and the list screen on page 77.
Storing and recalling broadcast
frequencies
With a tap of any of the preset tuning keys
(P1to P6), you can easily store up to six
broadcast frequencies for later recall (also
with the tap of a key).
1 Select a frequency that you want to
store in memory.
En
84
Chapter
15
Using the radio (AM)