Filter
Top Products
To Ensure Safe Driving
CAUTION
For your safety, avoid viewing the screen in the
voice operation as much as possible while
driving.
If you use voice operation, select [English]in
[Voice Language]of“Regional Settings”.If
you select other languages, voice operation
will not be available.
Basics of Voice Operation
Your Pioneer navigation system uses the latest
in voice recognition technology. You can use
voice commands to operate many of its func-
tions. This chapter describes where you can
use voice commands, and also what com-
mands the system accepts.
p This function is not available while the cata-
loging of iPod is created.
Flow of voice operation
You can start voice operation any time even
when the map screen is displayed or AV is op-
erating. (Some operations are not available.)
The basic steps of voice operations are as
follows.
! Switch the screen to map screen or AVop-
eration screen.
j
! Press the button to activate voice oper-
ations.
j
! Speak a command into the microphone
after the beep.
When the command is recognized, the na-
vigation system displays next options on
the screen, and pronounces it in some
cases.
j
! Repeat previous step as necessary.
j
! The requested operation will be carried out.
p The voice operation may not be operable for a
minute after the navigation system has booted
up.
p Voice operation will be activated 30 seconds
after the map screen is displayed.
If the
button does not respond, display
the disclaimer screen and then touch [OK].
The map screen is displayed.
Starting voice operation
% Press the button when the map
screen or the AVoperation screen is dis-
played.
The voice operation screen appears.
1
2
3
4
En
178
Chapter
32
Operating Your Navigation System with Voice