Pioneer AVIC-X920BT GPS Receiver User Manual


 
4 Pull the SD memory card out straight.
5 Press the h button.
The LCD panel closes.
p If data related to map data, such as custo-
mized POI data, is stored on the SD mem-
ory card,the navigation system restarts.
p When you eject the SD memory card by
touching [Eject SD], the model information
that you are using will be automatically
stored into the SD memory card.
The utility program AVIC FEEDS will use
this information to recognize the model
that you use.
Inserting an SD memory card
(for AVIC-X920BT)
p This section describes operations for AVIC-
X920BT.
% Insert an SD memory card into the SD
card slot.
Insert the SD memory card with the terminal
contacts facing down, and press the card until
it clicks and locks completely.
p If data related to map data, such as custo-
mized POI data, is stored on the SD mem-
ory card,the navigation system restarts.
Ejecting an SD memory card
(for AVIC-X920BT)
p This section describes operations for AVIC-
X920BT.
1 Press the h button.
The touch panel keys for ejecting the media
appear.
2 Touch [Eject SD].
A message prompting you to remove the SD
memory card appears.
3 Press the middle of the SD memory
card gently until it clicks.
4 Pull the SD memory card out straight.
En
17
Chapter
02
Basic operation
Basic operation