Filter
Top Products
SECTION FIVE: Checking out the system
957 INSTALLATION MANUAL, Revision C1 Page 37
Installation-test
checklist
To check-out the 957 system after installation:
1. Turn on the 957, then check for the presence of GPS,
WAAS, or DGPS signals.
2. Review the functions: With a chart cartridge inserted,
check that the CHART screen is displayed.
3. Confirm that the DIFFERENTIAL OPERATIONS option is at
the desired setting. If not, press the STAR key to display
the OPTIONS/SERVICE INFO screen, then press the
RECEIVER OPTIONS menu key to display the RECEIVER
OPTIONS screen. Press the EDIT key, change it to the
desired setting, then press the ENTER key.
For more in-depth information about troubleshooting the 957
installation, see ”SECTION SEVEN: Troubleshooting and
servicing the 957 system” starting on page 55.