Nokia 500 GPS Receiver User Manual


 
Introduction
8
The GPS antenna is located at the top of the navigation device. Some car
windscreens and windows may contain metal, that may block or weaken
the satellite signals.
If you stand still, GPS cannot detect which way you are facing because it
determines your direction on the basis of your movement.
Almost all digital cartography is inaccurate and incomplete to some
extent. Never rely solely on the cartography provided for use with the
GPS application.
The Global Positioning System (GPS) is operated by the government of the United
States, which is solely responsible for its accuracy and maintenance. The
accuracy of location data can be affected by adjustments to GPS satellites made
by the United States government and is subject to change with the United States
Department of Defense civil GPS policy and the Federal Radionavigation Plan.
Accuracy can also be affected by poor satellite geometry. Availability and quality
of GPS signals may be affected by your location, buildings, natural obstacles, and
weather conditions. The GPS receiver should only be used outdoors to allow
reception of GPS signals.
Any GPS should not be used for precise location measurement, and you should
never rely solely on location data from the GPS receiver and cellular radio
networks for positioning or navigation.
DVD
The navigation device comes with a DVD. You can do the following:
Restore data from the DVD to your memory card.
Copy new content from the DVD to the memory card. The content
can be, for example, maps, points of interest (POI) databases, and
languages.
Copy content from the DVD to another memory card.
Read the user guide available on the DVD in several languages.
Before copying data to the memory card, check that the card is not
locked. To copy content from the DVD to the memory card, ensure that
the card is inserted in the navigation device, and connect the device
with the supplied USB cable to your compatible PC. Alternatively, insert
the memory card into the memory card reader on your PC. Insert the