Navigator
31
When you use the keypad, you can only tap the keys that lead to a
search result; other keys are inactive. To delete the last character, tap
Clr. You can enter characters until you have narrowed down the search
to only one result, or you can tap and the desired address on the list.
To scroll through the list, tap the up or down arrow. To narrow down the
search, tap .
When you have found the address, tap in the Find address screen,
and tap the desired option. You can navigate to the address, add it to a
route (Via), save it as a bookmark, or view it on the map.
Navigate to a point of interest
You can search for a point of interest located near the desired location.
To navigate to a point of interest, press the menu key, and tap
Navigator > Destination > POI search. The start point (usually your
current location) of the search is shown at the top of the screen. To
change the start point, tap Where? and then Address to enter the
address, Favourites to select a previously saved address, or GPS position
to set your current location as the start point.
Tap the category and subcategory for the point of interest. Alternatively,
tap , enter the name of the point of interest, and tap .
A list of found points of interest is displayed. The list is sorted by the
distance to the start point. Tap the desired point of interest and option.
Favourites
To navigate to or manage destinations that you have saved as
favourites, press the menu key, and tap Navigator > Destination >
Favourites and one of the following: Home and work (your home or work
address), Bookmarks (previously saved addresses), or Trips.
Home and work addresses
To define a home or work address, in Favourites, tap Home and work. Tap
the desired field and option. You can enter the address, set your current
position as the address, or select the address from the list of recent
locations.