Nokia 500 GPS Receiver User Manual


 
Get started
16
To turn off Bluetooth connectivity when a device is connected to the
navigation device, press the menu key, and tap Phone > > > Yes.
To turn on Bluetooth connectivity, press the menu key, and tap Phone >
> > Yes.
Install the device in a car
To install the navigation device in a car, attach the HH-12 mounting
device to the CR-91 mobile holder, attach the mounting holder to the
windscreen, and place the navigation device into the mobile holder.
It is advised that you do not leave the mounting device or the mobile
holder visible in the car to prevent theft when you exit the car.
General safety instructions
Obey all local laws. Always keep your hands free to operate the vehicle
while driving. Your first consideration while driving should be road
safety. Only operate the mounting device, mobile holder, or navigation
device if it is safe to do so under all driving conditions.
When you install the mounting device or mobile holder, ensure that they
do not interfere with or hinder the steering or braking systems or other
systems used in the operation of the vehicle (for example, airbags) or
disturb your field of vision while driving.
Check that the deployment of the airbag is not blocked or impaired in
any way.
Ensure that the mounting device or mobile holder is not installed where
you might come in contact with it in the event of an accident or
collision.
Periodically check that the suction cup at the bottom of the mounting
device is firmly attached to the windscreen, especially if the ambient
temperature changes a lot.
Do not leave the product parts inside the vehicle in direct sunlight or in
excessive heat. The product may be damaged if the operating
temperature falls below -25°C (-13°F) or exceeds +55°C (131°F) or if the