Nokia 500 GPS Receiver User Manual


 
Get started
14
Bluetooth connection at startup
When you switch on the device or exit the standby mode, you are asked
whether you want to connect the device to the previous mobile phone.
To connect to the previous phone, tap its name. The map screen is
displayed.
To connect to some other device, tap Other. The Phone connections
screen is displayed. Tap the desired device and Connect. To download
the contacts saved in the other device, tap Yes.
To pair with a new device, in Phone connections, tap Pair new, and
proceed as instructed in steps 4 to 5 in “Set up Bluetooth connection,”
p 14.
Set up Bluetooth connection
You can connect the navigation device to a compatible mobile phone
using Bluetooth wireless technology.
To pair and connect the navigation device with your device, do as
follows:
1. Switch on the navigation device and your mobile phone.
2. Activate the Bluetooth feature on your phone. See the user guide of
your phone for instructions.
3. On the navigation device, press the menu key, and tap Phone.
If the Bluetooth feature is not active in your phone, you are asked if
you want to activate it. Tap Yes.
4. When the device asks you to start pairing from your phone, set your
phone to search for Bluetooth devices, and select the navigation
device (Nokia PND) from the list of found devices on your phone.
5. Enter the passcode 0000 on your phone to pair and connect the
navigation device to it.
In some phones you may need to make the connection separately
after pairing. See the user guide of your phone for details.
You only need to pair the navigation device with your phone once.