Filter
Top Products
Black plate (75,1)
Model "NAV2-N" EDITED: 2007/ 3/ 9
1. Push <DEST>.
2. Highlight [Nearby Places] and push
<ENTER>.
3. Highlight the preferred destination Points of
Interest and push <ENTER>.
A list screen is displayed.
4. Highlight the preferred destination from the
list, and push <ENTER>.
The position of the selected location is
displayed in the preview on the right side
of the screen.
INFO:
. If the suggested route is already set, by
highlighting [Show Along Route] and
pushing <ENTER>, the system displays
only the facilities located along the
route.
. A maximum of 100 facilities can be
displayed on the list screen.
5. The selected destination is displayed at the
center of the map. Highlight [Start] after
confirming the location and push
<ENTER>. The system sets the destination
to the selected location and starts calculat-
ing a route.
INFO:
If the route is already set, the selected location
becomes a waypoint.
Other settings
Setting a destination 4-15