Filter
Top Products
Tracker500/500i User Manual32
BEARINGS
UNITS
TIME
FUEL
DISPLAY
LANGUAGE
SIMULATE
The Tracker500/500i automatically calculates the magnetic variation
for the location in which it is situated. Consequently, all bearings and
course directions can be displayed either relative to true North or
magnetic North. Select TRU or MAG as required.
The Tracker500/500i has three units of measure; Nautical miles,
Statute (land) miles and Kilometres. This setting applies to all distance
and speed readings displayed on the Tracker500/500i.
OFFSET This is the time offset from your time zone to
Greenwich Mean Time (GMT). Range +/- 13 hours in
steps of 30 minutes.
12/24HR Sets the time display to be in either 12 hour or 24
hour format.
ENGINES Choose the number of petrol engines, 1 or 2.
VOL UNIT Select the unit of measure for volume; litres, Imperial
gallons, or U.S. gallons.
FLOW FLTR Adjust the amount of averaging of the fuel flow rate.
Range 1–60.
CONTRAST Display Contrast. This adjustment enables you to
obtain the optimum display appearance. Set the level
for optimum display contrast. Range 0–10.
BACKLIGHT Display backlight intensity. Range 0–15.
English, French, German, Swedish, Spanish, Dutch, Italian.
Simulation mode provides a method of becoming familiar with the
Tracker500/500i functions. Boat movement is simulated and all
navigation functions are available. Setting SIMULATE to ON generates
a simulated boat with an initial position at the current position of the
Trackplot screen cursor, with zero speed and heading. To change the
speed and heading, switch to the Highway screen and use the cursor
up and down keys to change speed, and left and right to change the
boat’s heading.