23Tracker500/500i User Manual
From The Trackplot Screen.
zoom-out
2. Press and hold the
key until the Waypoint Details are
displayed.
zoom-out
1. Use the cursor keys to
position the Trackplot cursor
over the required waypoint.
The waypoint name will
appear in the top section of
the Trackplot display.
3. The waypoint name and
lat/lon will be displayed. To
change waypoint information
such as name, lat/lon or
symbol, select the EDIT
function from the list of
available functions.
11.4 Changing Waypoint Details
To change the lat/lon value, waypoint name or waypoint symbol, display the Waypoint Edit
screen by selecting EDIT from the Waypoint Details screen.
zoom-outzoom-in
mark
ctr
MOB
Waypoint Symbols
on
To edit the data on this page use the cursor keys to highlight the desired item and press the
key to select it. Then use the and cursor keys to change the first character. These keys
are used to scroll through the letters of the Alphabet and numbers 0-9. After the changes
have been completed press the
key to move to the next character or press the key to