Filter
Top Products
27Tracker500/500i User Manual
13.0 Routes
A route is a sequence of waypoints that are traversed in order. A route can consist of any
number of waypoints from a minimum of two to a maximum of 20. Routes can be started
from any waypoint within the route and can be traversed in either direction.
The Routes screen can be accessed from the Main Selection screen. The Routes screen has
options for creating, editing and activating routes.
Note: While a route is active you can create new routes or edit other
existing routes in memory. However, you can not edit the current active
route or any waypoints within the active route.
13.1 Creating a New Route
A route is created by selecting the waypoints in the route from those currently in memory.
1. Use the cursor keys to
select from the
screen.
Routes
Main Selection
2. Select to create a new route.New A
default route name will be displayed. The
cursor will be positioned on the route
name allowing you to use the cursor keys
to change the name, if required.
Press the key to save the route name
to memory and to continue to the next
step. A list of waypoints currently stored in
memory will be displayed.
3. To select the first waypoint in the route,
highlight it with the cursor keys and press the
key. Tocontinue to add further waypoints to the
route see the following section titled Adding and
Deleting Waypoints in a Route.
Press
to select
waypoint
4. To exit the routes screen and save the new
route to memory, press the key.
Creating a New Route