Filter
Top Products
Tracker500/500i User Manual26
12.0 Marks
Marks are temporary waypoints. They are saved separately from waypoints, making them
easier to find, change or delete. Marks are created by momentarily pressing the power on/
off key. This will save the current boat position with a temporary name in the range of
MARK0 to MARK9. Up to ten Marks can be saved in this manner. If more than ten Marks are
created, the oldest ones will be overwritten by the more recent ones. There is a Mark Details
screen in the same way as there is a Waypoint Details screen. The Mark Details screen can
be displayed either by positioning the cursor over the mark on the Trackplot screen and
holding down the zoom-out key, or by selecting the mark from the list displayed by the
MARKS option on the Main Selection screen.
The symbol for a Mark is:
12.1 Converting Marks to Waypoints
Marks can be converted to Waypoints by selecting the SAVE AS function from the Mark
Details screen.
From The Trackplot Screen
4. An edit screen will be displayed, allowing
you to change the name of the waypoint and
the waypoint symbol. Use the cursor keys to
edit these.
3. Select from the
list of available functions.
SAVE AS
5. Press to save the changes to memory.
zoom-out
2. Press and hold the z
key until the Mark Details screen
is displayed.
oom-out
1. Use the cursor keys to
position the Trackplot cursor
over the required Mark. The
Mark name will appear in the
upper section of the Trackplot
display.