Filter
Top Products
User’s manual NAVIGON 81xx
Troubleshooting - 69 -
The software does not respond any longer. The screen is frozen.
or
The software responds strangely to my entries.
Carry out a device reset. All the internal components of the navigation
device will be reset as the result.
1. With the
(On/Off) key pressed and held, press the key
simultaneously. (This key is countersunk. Use the stylus or a paper-
clip.)
The device will switch off. Wait a few seconds.
2. Press the
(On/Off) key in order to switch the device back on
again.
The software will now be reloaded. As soon as the S
TART window
appears, you can use the device again.
The navigation device won't switch on.
Possible causes and their remedies:
► The navigation device hasn't been used for a long time. The battery
is flat.
Charge the battery of the NAVIGON 81xx for a few minutes before
you switch it on.
► The navigation device is very cold.
Insert the NAVIGON 81xx into the cradle. Make sure that the power
supply is connected before you switch on the device.
I want to dial a number from the phone book of my mobile phone with the
NAVIGON 81xx. The mobile phone tells me that the data transmission was
successful but the NAVIGON 81xx is still not ready to dial.
The NAVIGON 81xx has to convert as well as import the data. This can
take a lot of time particularly with large phone books.
You can also dial the number with the mobile phone and then transfer
the call to the NAVIGON 81xx. (Refer to "Transferring a call from your
mobile telephone
" on page 54)