Filter
Top Products
User’s manual NAVIGON 81xx
- 12 - Before you begin
2.4.3 Memory card
A memory card with the software and card data is already inserted in
the navigation device.
You can copy these data to another memory card or save them on your
PC. To do so, use the NAVIGON Fresh software which is included on
the CD provided or can be downloaded free of charge from
www.navigon.com
.
The following memory media can be used in the NAVIGON 81xx:
► SD cards with maximum 2 GB
► SDHC cards
Removing the memory card
1. Switch off the navigation device. To do so, press the
(On/Off)
key.
2. Press the memory card gently into the device until the lock
disengages.
3. Let go of the memory card. It will now project slightly out of the
device.
4. Pull the memory card out of the slot.
Inserting a memory card
1. Insert the memory card into the device (see illustration).
2. Press the card into the device until it locks in place.
Note: The navigation device will work only if the memory card contains
the navigation software and map data.