Filter
Top Products
User’s manual NAVIGON 81xx
Before you begin - 13 -
2.4.4 Preparing the navigation system for use
Caution! Be sure to refer to all the safety information in chapter
"Important safety information" on page 8.
Securing the cradle
1. Clean that part of the windscreen to which you want to secure the
cradle. The windscreen must be dry and free of dirt and grease.
2. Use the suction cup to fix the cradle to the windscreen.
3. Press the lever on the suction cup forwards.
Supplying power to the navigation device
Included in delivery of the NAVIGON 81xx is a car charger cable with
which power can be supplied to the navigation device via the vehicle's
cigarette lighter.
Connect the car charger cable to the vehicle's cigarette lighter and to
the mini-USB socket on the cradle. The navigation device will be
supplied with power as soon as it is inserted in the cradle.
Note: Power supply will only be possible via the cradle when the
navigation device is inserted. The device's USB socket will then be out
of function.
Caution! Connect the car charger cable only to 12V cigarette lighters.
TMC antenna
The NAVIGON 81xx has an integrated TMC receiver. A TMC antenna
is integrated in the car charger cable. As soon as the navigation device
is inserted in the cradle it can receive traffic message updates. Dynamic
route changes are thus possible, e.g. in order to avoid a traffic jam.
Inserting the navigation device into the cradle