User’s manual NAVIGON 81xx
Appendix - 67 -
12.2 Identification and serial number
The navigation device has various identification labels underneath the
rear cover (e.g. CE label, serial number, ...)
If you need to see any of these labels, proceed as follows:
1. Switch off the navigation device.
2. Take the stylus and the memory card out of the device.
3. With your thumbnail in the slot on the bottom of the device, pull the
rear cover off the device.
To close the rear cover again:
1. Place the cover correctly in position.
2. Push the cover firmly against the device until it latches home in all
corners.
3. Re-insert the stylus and the memory card.
Note: We recommend that you remove the rear cover only when told to
do so by our service staff.
12.3 Declaration of conformity
The NAVIGON 81xx device described in this manual bears the
following labels:
It is authorised for operation in the countries of the European Union,
Switzerland, Norway and the countries of North America.
NAVIGON AG declares herewith that the NAVIGON 81xx device
conforms with the Radio & Telecommunication Terminal Equipment
Directive (R&TTE) (1999/5/EEC).
The direction of conformity can be found at the following Internet
address:
http://navigonuk.custhelp.com/cgi-
bin/navigonuk.cfg/php/enduser/std_adp.php?p_faqid=222
The manufacturer is not liable for modifications made by the user which
may alter the device's conformity with the CE label, nor for the
consequences thereof.