Filter
Top Products
NAVIGON Lifetime Traffic
TMC Settings Window
December 2008 NAVIGON 2100 max | 2120 max User’s Guide 109
Version 2.1 NAVIGON, INC.
TMC Settings Window
In the TMC SETTINGS WINDOW, you can set and configure the TMC receiver, these set-
tings determine how received traffic messages will affect subsequent routing.
On the
MAIN WINDOW:
1. Tap
Options > Traffic > Settings.
Select another station
On the TMC STATUS WINDOW:
•Tap (
To the Left) and (To the Right) to tune to another station.
Select Tuning Mode Settings
On the TMC SETTINGS WINDOW:
1. In the T
uning Mode field, select an option:
Automatically The system searches for another station if reception becomes
poor.
Hold station The system searches for the same station on a different fre-
quency if the signal becomes poor.
Hold frequency The system does not search for another station if reception
becomes poor.
2. Tap (
List) to view the list and select an option.
3. Tap the
Done button to save your changes.
Recalculating Route
On the TMC STATUS WINDOW:
1. In the
Recalculate Route field, select an option:
On Request The route is only recalculated when requested.
Automatically The route is automatically recalculated every time a severe
traffic event is identified on the route.
Note: Some stations do not have TMC information.