Filter
Top Products
Chapter 6 Automotive Diagnostic Command Set API for C
© National Instruments Corporation 6-107 Automotive Diagnostic Command Set User Manual
ndUDSSendKey
Purpose
Executes the UDS SecurityAccess service to send a key to the ECU.
Format
long ndUDSSendKey(
TD1 *diagRef,
unsigned char accessMode,
unsigned char keyIn[],
long len,
LVBoolean *success);
Input
diagRef
Specifies the diagnostic session handle, obtained from ndOpenDiagnostic and passed
to subsequent diagnostic functions. Normally, it is not necessary to manually manipulate
the elements of this struct.
accessMode
Indicates the security level to be granted. The values are application specific. This is an
even number, usually 2.
keyIn
Defines the key data to be sent to the ECU.
len
Must contain the number of valid data bytes in keyIn.
Output
success
Indicates successful receipt of a positive response message for this diagnostic service.
Return Value
The return value indicates the function call status as a signed 32-bit integer. Zero means the
function executed successfully. A negative value specifies an error, which means the function
did not perform the expected behavior. A positive value specifies a warning, which means the
function performed as expected, but a condition arose that may require attention.
Use the
ndStatusToString function to obtain a descriptive string for the return value.