Filter
Top Products
Chapter 6 Automotive Diagnostic Command Set API for C
Automotive Diagnostic Command Set User Manual 6-38 ni.com
ndControlDTCSetting
Purpose
Executes the ControlDTCSetting service. Modifies the generation behavior of selected
Diagnostic Trouble Codes (DTCs).
Format
long ndControlDTCSetting(
TD1 *diagRef,
unsigned short groupOfDTC,
unsigned char dataIn[],
long len,
LVBoolean *success);
Input
diagRef
Specifies the diagnostic session handle, obtained from ndOpenDiagnostic and passed
to subsequent diagnostic functions. Normally, it is not necessary to manually manipulate
the elements of this struct.
groupOfDTC
Specifies the group of diagnostic trouble codes to be cleared. The following values have
a special meaning:
0x0000 All powertrain DTCs
0x4000 All chassis DTCs
0x8000 All body DTCs
0xC000 All network related DTCs
0xFF00 All DTCs
dataIn
Specifies application-specific data that control DTC generation.
len
Must contain the number of valid data bytes in dataIn.