Filter
Top Products
Chapter 6 Automotive Diagnostic Command Set API for C
Automotive Diagnostic Command Set User Manual 6-68 ni.com
ndStopDiagnosticSession
Purpose
Executes the StopDiagnosticSession service. Returns the ECU to normal mode.
Format
long ndStopDiagnosticSession(
TD1 *diagRef,
LVBoolean *success);
Input
diagRef
Specifies the diagnostic session handle, obtained from ndOpenDiagnostic and passed
to subsequent diagnostic functions. Normally, it is not necessary to manually manipulate
the elements of this struct.
Output
success
Indicates successful receipt of a positive response message for this diagnostic service.
Return Value
The return value indicates the function call status as a signed 32-bit integer. Zero means the
function executed successfully. A negative value specifies an error, which means the function
did not perform the expected behavior. A positive value specifies a warning, which means the
function performed as expected, but a condition arose that may require attention.
Use the
ndStatusToString function to obtain a descriptive string for the return value.
Description
This function disables the current ECU diagnostic mode. A diagnostic session stops only if
communication with the ECU is established and a diagnostic session is running. If no
diagnostic session is running, the default session is active.
ndStopDiagnosticSession
cannot disable the default session. If the ECU stops the current diagnostic session, it performs
the necessary action to restore its normal operating conditions. Restoring the normal ECU
operating conditions may include resetting all controlled actuators activated during the
diagnostic session being stopped, and resuming all normal ECU algorithms. You
should call
ndStopDiagnosticSession before disabling communication with
ndCloseDiagnostic, but only if you previously used ndStartDiagnosticSession.