Filter
Top Products
Chapter 6 Automotive Diagnostic Command Set API for C
Automotive Diagnostic Command Set User Manual 6-94 ni.com
ndUDSReportDTCByStatusMask
Purpose
Executes the ReportDTCByStatusMask subfunction of the UDS
ReadDiagnosticTroubleCodeInformation service. Reads selected Diagnostic Trouble Codes
(DTCs).
Format
long ndUDSReportDTCByStatusMask(
TD1 *diagRef,
unsigned char statusMask,
TD3 *DTCDescriptor,
unsigned char *statusAvailMask,
TD4 DTCs[],
long *len,
LVBoolean *success);
Input
diagRef
Specifies the diagnostic session handle, obtained from ndOpenDiagnostic and passed
to subsequent diagnostic functions. Normally, it is not necessary to manually manipulate
the elements of this struct.
statusMask
Defines the status of DTCs to be read. The values are application specific.
DTCDescriptor
A struct that describes the DTC records the ECU delivers:
typedef struct {
long DTCByteLength;
long StatusByteLength;
long AddDataByteLength;
unsigned short ByteOrder;
} TD3;
DTCByteLength
indicates the number of bytes the ECU sends for each DTC. The
default is 3 for UDS.
StatusByteLength indicates the number of bytes the ECU sends for each DTC’s
status. The default is 1.
AddDataByteLength indicates the number of bytes the ECU sends for each DTC’s
additional data. Usually, there are no additional data, so the default is 0.