Filter
Top Products
396
Practical hints
Replacing wiper blades
Wiper blades in vertical position
Removing wiper blades
̈ Turn SmartKey in starter switch
position 1.
̈ Turn combination switch to wiper
setting II (
୴ page 52).
̈ With wiper arm in vertical position, turn
SmartKey in starter switch to
position 0.
̈ Fold the wiper arm forward until it
snaps into place.
̈ Turn the wiper blade at a right angle to
wiper arm (arrow 1).
̈ Slide the wiper blade sideways out of
the retainer in the direction of
arrow 2.
!
To avoid damage to the hood, the wiper
arms should only be folded forward
when in the vertical position.
Warning! G
For safety reasons, switch off wipers and re-
move SmartKey from starter switch (vehi-
cles with KEYLESS-GO*: Make sure the
vehicle's on-board electronics have status
0) before replacing a wiper blade. Other-
wise, the wiper motor could suddenly turn
on and cause injury.