Filter
Top Products
167
Controls in detail
Control system
To activate night security illumination:
̈ Select delayed switch-off period (see
below).
̈ Turn the exterior lamp switch to
position U before turning off the en-
gine.
To select delayed switch-off period:
̈ Move the selection marker with
the æ or ç button to the
LIGHT-
ING
submenu.
̈ Press button j or k repeatedly
until you see this message in the multi-
function display:
HEADLAMPS DELAYED
SWITCH-OFF
.
The selection marker is on the current
setting.
̈ Press æ or ç to select the de-
sired lamp-on period.
You can select:
ț
0 SEC.
, the delayed switch-off fea-
ture is deactivated
ț
15 SEC.
,
30 SEC.
,
45 SEC.
, or
60 SEC.
, the delayed switch-off fea-
ture is activated
You can temporarily deactivate the de-
layed switch-off feature:
̈ Before leaving the vehicle, turn the
SmartKey in the starter switch to
position 0.
̈ Turn the SmartKey in the starter switch
to position 2 and back to 0.
The delayed switch-off feature is deac-
tivated. It will reactivate as soon as you
reinsert the SmartKey in the starter
switch.
Vehicles with KEYLESS-GO*:
̈ Press the KEYLESS-GO start/stop
button (
୴ page 35) on the gear selec-
tor lever.
Interior lighting delayed switch-off
Use this function to set whether and for
how long you would like the interior light-
ing to remain lit during darkness after the
SmartKey is removed from the starter
switch.
̈ Move the selection marker with
the æ or ç button to the
LIGHT-
ING
submenu.
i
You can reactivate this function within
ten minutes by opening a door.
If you do not open a door after remov-
ing the SmartKey, the lamps will auto-
matically switch off after 60 seconds.
୴୴