Filter
Top Products
163
Controls in detail
Control system
Instrument cluster submenu
Access the
INST. CLUS.
submenu via the
SETTINGS
menu. Use the
INST. CLUS.
sub-
menu to change the instrument cluster dis-
play settings. The following functions are
available:
Selecting temperature display mode
̈ Move the selection marker with
the æ or ç button to the
INST.
CLUS.
submenu.
̈ Press button j or k repeatedly
until you see this message in the multi-
function display:
TEMP. INDICATOR
.
The selection marker is on the current
setting.
̈ Press æ or ç to set the temper-
ature unit to degrees Celsius (
°C
) or de-
grees Fahrenheit (
°F
).
Selecting multifunction display mode
̈ Move the selection marker with
the æ or ç button to the
INST.
CLUS.
submenu.
̈ Press button j or k repeatedly
until you see this message in the multi-
function display:
DISPLAY VALUES IN
.
The selection marker is on the current
setting.
̈ Press æ or ç to set speedome-
ter unit to
MILES
or
KM
.
Function Page
Select temperature display
mode
164
Select multifunction display
mode
163
Select language 164
Select tire inflation pressure unit 164