Filter
Top Products
185
Controls in detail
Automatic transmission
Deactivating manual shift program
̈ Press the program mode selector
switch (
୴ page 183) repeatedly
until
C
or
S
appears in the tachometer
display.
or
̈ Restart the engine.
The transmission will go to the
automatic program mode (C or S).
The manual program mode M is not
stored.
Emergency operation (Limp Home
Mode)
If vehicle acceleration worsens or the
transmission no longer shifts, the trans-
mission is most likely operating in limp
home (emergency operation) mode. In this
mode only second gear and reverse gear
can be activated.
̈ Stop the vehicle.
̈ Move gear selector lever to P.
̈ Turn off the engine.
̈ Wait at least ten seconds before
restarting.
̈ Restart the engine.
̈ Move gear selector lever to position D
(for second gear) or R.
̈ Have the transmission checked at an
authorized Mercedes-Benz Center as
soon as possible.