Filter
Top Products
81
Safety and Security
Occupant safety
To fold anchors out
1 Anchors
2 Release button
̈ Grip inner side of anchors 1 and fold
forward until they audibly lock in place.
̈ Install child seat according to the man-
ufacturer’s instructions.
To fold anchors back
̈ Press down button 2 on each
anchor 1 and return the anchor 1 to
its catch.
i
The child seat must be firmly attached
in the right and left side anchors 1.
i
Non-LATCH type child seats may also
be used and can be installed using the
vehicle’s seat belt system. Install child
seat according to the manufacturer’s
instructions.
Warning! G
Children too big for a toddler restraint must
ride in seats using regular seat belts.
Position shoulder belt across chest and
shoulder, not face or neck.
A booster seat may be necessary to achieve
proper belt positioning for children from
41 lbs until they reach a height where a
lap/shoulder belt fits properly without a
booster.
Before installing the child seat, make sure
anchors 1 are folded out and locked in
place.
Install child seat according to manufactur-
er’s instructions.
The child seat must be firmly attached in the
right and left side anchor 1.
An incorrectly mounted child seat may come
loose during an accident which could result
in serious injury or death to the child.
Damaged or impact damaged child seats or
child seat anchor fittings must be replaced.
Do not leave children unattended in the ve-
hicle, even if the children are secured in a
child restraint system.