Filter
Top Products
160
Controls in detail
Control system
Setting key-dependency
Use this function to set whether the
memory settings for the seats, the steering
wheel and the mirrors should be stored
separately for each SmartKey
(
୴ page 121).
̈ Move the selection marker with
button æ or ç to the
Convenience
submenu.
̈ Press button j or k repeatedly
until the message
Key-dependent
appears in the multifunction display.
The selection marker is on the current
setting.
̈ Press button æ or ç to set
key-dependency to
on
or
off
.
Setting parking position for exterior rear
view mirror
Use the
Mirror adjustment parking aid
function to select whether the passen-
ger-side exterior rear view mirror should be
turned downward during parking maneu-
vers, when reverse gear R is engaged. For
additional information, see “Activating ex-
terior rear view mirror parking position”
(
୴ page 180).
̈ Move the selection marker with
button æ or ç to the
Convenience
submenu.
̈ Press button j or k repeatedly
until the message
Mirror adjustment
parking aid
appears in the multifunc-
tion display.
The selection marker is on the current
setting.
̈ Press button æ or ç to switch
function
on
or
off
.
Trip computer menu
Use the trip computer menu to call up sta-
tistical data on your vehicle.
The following information is available:
Function Page
Fuel consumption statistics after
start
161
Fuel consumption statistics
since last reset
161
Call up range (distance to empty) 162